The FTC wants you to know that some links on this website are affiliate links. That means that I may get paid a small amount from the retailer if you click their link and make a purchase. In no way will it affect your purchase price.

LEGO Techniques - Gear With Studs

Quite a while ago I ran a series of posts describing the different sizes of Systems and how they all were part of the greater whole.  That is, bigger is still compatible with smaller.  In my wrap-up one astute reader noted that I had missed the stud sizes for gear such as salt and pepper shakers, minifig display cases, and clocks.  Finally, months later, here's another installation.

I bought a set of salt and pepper shakers more for the novelty than use in the actual kitchen.  That's a nice way of saying the Mrs. Dagsbricks would not let me use these in the kitchen but camping would be okay.  I'll pass on the dirt/ABS mashup.  So they are novelty items in my office space.  But while purchasing these I used them to test sizes of various "Gear" and discovered that there is consistency even in these large items.

To wit the 1x1 brick salt shaker:

Width: 47mm.  This is 8mm x 6 = 48mm - 1mm of tolerance.
Height: 57mm.  9.6mm x 6 = 57.6mm.  My calipers could be off a touch.
Stud Diameter: 29mm.  4.8mm x 6 = 28.8mm.
Stud Height: 11mm. 1.7mm x 6 = 10.2mm.  So apparently these studs are a touch high.

This comes in at the same size as Primo and Soft Bricks, six times LEGO System.  I've updated the chart with this new item.  Due to the height of Primo studs, they are only compatible in one direction with the gear.  You can stack Primo on top of gear but the other way 'round will be an exercise in frustration.

Practically there's very little value to this size other than novelty.  As with Primo there's no clutch to speak of.  But if you really wanted to you could create some sort of a megalith with your display cases and salt and pepper shakers, then topped off with whimsical Primo blocks.  But at that point you've got more free time and/or money than me.

No comments:

Post a Comment