The FTC wants you to know that some links on this website are affiliate links. That means that I may get paid a small amount from the retailer if you click their link and make a purchase. In no way will it affect your purchase price.

Showing posts with label fence. Show all posts
Showing posts with label fence. Show all posts

LEGO Techniques - Fencing Your Goods

Been a while, what say we have a proper techniques post?  'Tis Christmas after all.  And what better gift from me to you than fresh material?  Right-o, off we go then!

What's the best gift that TLG can give to us?  A redesigned part?  A new part?  How about a completely redone part such that the cleverness and usefulness of the old part is done away with completely in the name of "child safety".  You see the quotations I'm making with my claw hands?

My particular woeful rant today is over the old Duplo fence, part number 3967.  (Wot, no picture?  On it, chief!).  I have a handful of these and I used to think they were junk.  But the more I explored and caressed them, the more I realized how brilliant they were as a crossover piece in connecting Duplo and System.

For starters is the clip system to interlock them together.  On one side is a clip, the other side is a bar, very similar to a handle on a 1x2 plate.  It didn't take very much time or finagling to make a connection from one side of the fence to the other.  The fact that I couldn't locate a 1x2 plate with closed end handle was a little annoying.  Nonetheless it was quite easy to discern that there are exactly 25 plates of height between the two grippy ends of the fence.  That's 80mm which is also exactly 10 studs in width.  Oooh, can we double check that somehow?

Sure enough, the feet of the fence are also System friendly.  In the bottom is a little hole somewhere along the lines of 4.85mm in diameter, the exact size needed for a System stud.  It fits nice and snug too.  By placing jumpers on either end of a 1x10 plate, we can check the distance of the fence.  Those little feet fit nicely in between Duplo studs, and are about 6.4mm wide by 12.8mm long.

Some other stats:
  • Fence posts are 6.4mm square (two plate thicknesses) and 28.8mm tall (3 bricks tall);
  • Rails are about 3.3mm thick, a little more than a plate;
  • Gap between rails is about 6.3mm, a little less than two plates thick;
  • Void in the back of rails is right about 1.6mm, or a half plate thick; same as the lip on a headlight brick.
  • Void behind the posts is a bit over 3.3mm.  A tile slides in fine, but does not clutch.

In short, this is an amazing crossover piece, even more useful as a scaffold for System alone.  They are anywhere from 2 to 20 for a buck on the marketplaces.  On your next BrickBird order, pick up a few.  And may your stocking be filled with a complete S13 set.

LEGO Tips and Techniques - Fence vs. Panel

At first glance, fences may appear to be nothing more than a perforated panel.  You may even be tempted to use them in line to create a certain look.  Besides, the fence is only made in 4L, not 2L or a 1x1 corner like the panel.  It can certainly work fine but be aware of the differences.

The panel is essentially a tile with a half plate wide 2 plate tall wall on it.  The thickness of the wall is 1/5th the width of the lower part (1.6mm vs. 8.0mm).  This is a common ratio as can also be seen on the grill tiles.  If used cleverly in SNOT, this panel can be added to the height of 2 plates to achieve a brick's width.  Or added to a brick's width to achieve a brick's height.  Place 2 panels back to back and you have a 3.2mm thick portion, the same as a plate width.  You can even use it like a pony-ear.

Since a panel wall is a small fraction of a plate width, you can do some cool staggering with it.  This idea is not my own but I'll take credit for being able to replicate it.  The panels rest on each other and are locked in place at the top by a plate or two.  Add an arched window and you have a nice castle wall detail.

The fence on the other hand has a very tricky 2.4mm thickness.  My first thought is that this was made this way to add strength to the perforated wall.  This wall is 3/10th the width of the tile portion or 1/10th of a plate width wider than the panel.  This 0.8mm discrepancy may not seem like much but the eye is not fooled.  At least my eye is not.

You might think it odd to use 2.4mm since that doesn't fall into LEGO's 1.6mm grid very well.  It sort of fits.  I mean, it's 1.5x that grid number.  So maybe you can't get to 8.0mm in brick width very well but if you place two fences back to back you get 4.8mm which is half a brick height.  Tyco anyone?  4.8mm also represents the diameter of a stud for whatever that one's worth.

That lattice is also the perfect size for studs.  This piece can be used for 90° inverted (studs in) SNOT.  Beware that you will be dealing with a plate height on one side (3.2mm) and a fence lattice width of 2.4mm on the other side.  Adding plate widths to the 2.4mm doesn't get you much of anywhere until you add a brick.  The 9.6mm plus the 2.4mm lattice is 12.0mm which is a brick and a half in width.

What ways have you used the fence or panel?